Advanced WindWall™

AWW Right Tilt 2

The Advanced WindWall™

Our most advanced wind turbine system in either 50 kilowatt (kW) or 100 kilowatt (kW ) size, the Advanced WindWall™ (AWW) is a revolution in the wind turbine market. Not because of its power output or its size but both. The AWW much like the standard WindWall is an array of MicroCubes. The AWW is different in that it contains either 50 or100 MicroCubes™ linked into two arrays on either side of a main tower. The main tower at its base is connnected to a worm geared motor to rotate the AWW. Every minute the anemometer & wind vane ontop of the main tower signals the AWW to adjust its self to essure maximum efficencty is being reached in all wind speeds. This is extremely important as the AWW has a cut in speed of just 1.5mph and has been tested to speeds of 140mph.

Maintence

Low O&M Cost

Power

Reliable Power

Time

95% Up Time

ROI

Short ROI

More up time

Because of low cut In speed

The Adavacned WindWall™ cuts in at 1.5mph wind speeds and has been test to 140mph wind speeds. With that kind of range your up time is second to none.

The AWW Up Time
95%
Polaris 100kW*
50%
PowerWorks 100kW*
35%

* approximate up time using wind data plus power charts.

AWW Power Curve

The power curve for the Advanced WindWall™ is much different than traditional wind turbines. Our power output starts at just 1.5mph and we achieve 100kW at 65mph. Our greatest advantage over all other wind turbines is our range. With the ability to operate from 1.5mph to 140mph wind speeds, the AWW is constantly remaining a reliable, resilient source of power. (The area's in the dark grey is around 30% of the united states wind speed under 30 meters. The light grey is around 70% of the united stateswind wpeeds under 30 meters. )

PowerCurve

Wind Tunnel and CFD Modeling Results.

gtri

GTRI was tasked with testing the MicroCube™ and MicroSphere™ from the absolute lowest wind speed to the maximum of the wind tunnel. The results of the test were a confirmed power curve. During the test a drag assement was completed. It concluded that the MicroCube™ and MicroSphere™ tested had a drag coefiecnt of just 0.2 and only produced ten pounds of drag at 100mph. ( less than the mirror of a car. )

2M5A6935
2M5A6933
2M5A6957
Jacobs_Engineering.svg

It is important to note that regardless of the level of measurement accuracy and controllability, test data for a common test article will show some level of variation in performance when measured at different facilities. This is due to a variety of possible differences including measurement methods and instrumentation accuracy, facility operations, and the inherent limitations of how well a wind tunnel simulates “real-world” conditions. However, even with these possible effects impacting the test data, the revised JT results indicate improved agreement with GTI data, which provides experimental confirmation of the performance of AWI’s micro wind turbine designs”

-Jacobs Technology Summary

SimScale_logo_rgb-01
recirculationLIC 300x300

What is shown is the airflow being accelerated through the MicroCube™. The slow air speed shown in blues and greens turns into red and yellow as it passes the blades, showing the unique ability of the MicroCube’s blade design.

Unknown

Visit www.windguru.cz to see wind speeds in your area.

nrel-logo

To get United States wind speed averages please visit NREL webpage. These charts provide wind data averages for different levels of elevation

Asuns and Reapso visit American Wind, inc in Huntsville to witness the MicroCube and our products in action. They are now our sole-distributor to Sub-Sahara africa.
American Wind, Inc was invited by the Department of Defense to Crimison Viper in Thailand, where we succesfully demostrated our prototype for a back packable unit.
American Wind was hosted in the Methods Machine Tools, Inc booth at IMTS 2016 allowing us to show how we rapidly developed our state of the art wind turbine.
American Wind was hosted in 3d Systems booth at CES 2015.
American Wind at the Department of Energy Conference 2016
American Wind, inc's first wind tunnel test. A successful test to 140mph.
Size ComparissonRBG

Size Matters

Conventional renewable energy systems produce large amounts of power but at the expense of large amounts of space. This limitation found in conventional systems reduces their applications. When you compare systems of equal electrical output you see the vast difference in American Wind, Inc’s technology.

Advanced WindWall™
444.4w/ ft sq

Conventional Wind Turbine
44.4w/ ft sq

Solar Panel
4.44w/ ft sq

Don't Break The Bank!

American Wind, inc has worked with a large nationwide financial institution to offer third party financing opportunities for your projects. Click the Contact us button below to find out more details.

breaktheBank

Modular Output

The WindWall™ and Advananced WindWall™ come standard with smart control boxes. Each turbines power is linked into these control boxes where electrontic relays determine how their power is linked togeather. In real time the control box switches each microcube from serial to parallel or a mixture of the two. This allows for a constant output. In the computer system inside the control boxes you can set a voltage peak and amperage peak and the control system will make sure you do not excced this peak.

The modular design also allows for quick cut off of power at the control box. Built into the control system stands a quick disconnect relay. This is put inplace incase of fire or other emergency should occur where power needs to be cut off instantly.

Parllel

Parallel

This allows you to increase the capacity ( amperage ).

Serial Set up

Serial

This allows you to increase the voltage.

Mix Electircal

Half/Half

This allows you to balance a higher voltage and amperage.

Advanced WindWall Specs

Max Output :

Max Voltage (DC) :

Max Amperage (DC) :

Size :

Weight :

Cut In Speed :

Max Wind Speed :

Min Temp :

Max Temp :

100 Kilowatt (kW)

18,000v | 1,800v | 180v (volts)*

6a | 60a | 600a (amps)*

96 x 120 x 24 (in)

900lbs**

1.5mph

140mph

-15F

375F


* Due to the nature of the WindWall each MicroCube™ can be placed in either serial or parallel, increasing either voltage or amperage. This is done live in the control system to keep output as constant as possible.

** Approximage Weight - Due to the use of different materials for custom systems the weight may varry.